At only 284g, the Z1 is a quantum leap in portable cpap.

In development for more than three years, we looked at every part and component in a cpap machine and relentlessly attempted to improve upon it. From a smaller motor to a more compact circuit board, we whittled away every ounce of wasted space until we arrived at the Z1; the smallest, lightest, most portable cpap machine in the world.

Small enough for travel. Powerful enough to be used every day.

The Z1 is an ideal travel machine. It literally fits in the palm of your hand so you will never have to leave your cpap at home.

  • Fixed pressure cpap
  • Pressure range 4-20 cm H2O
  • Z-Breathe Algorithm for pressure relief
  • Weighs 284g
  • 16.46 cm x 8.38 cm x 5.13 cm
  • FAA compliant for in-flight use
  • Data Viewer software via USB to a Windows based computer
  • Integrates with Powershell to provide battery powered CPAP treatment
  • Bright LCD display
  • Programmable ramp mode for gradual acclimation to prescribed pressure
  • Power supply converts voltage ranging from 100-240 volts automatically
  • Internal memory stores sleep data

Technical Specifications

30W Power Adapter

Unit Input range 100–240V, 50–60Hz

Typical power consumption 20W (30VA)

Maximum power consumption 35W (70VA)

Operating temperature 5ºC to 35ºC (41ºF to 95ºF)

Operating humidity 10–80% Relative Humidity, Non-Condensing

Operating altitude Sea level to 2400 m (8,000 ft)

Operating atmospheric pressure 101 to 75.3 kPA

Storage and transport temperature -20ºC to +60ºC (-4ºF to +140ºF)

Storage and transport humidity 10–80% Relative Humidity, Non-Condensing

Storage and transport altitude No limit

Storage and transport atm. pressure No limit

Electromagnetic compatibility Compatible with IEC 60601-1-2

Aircraft use Complies with RTCA DO-160G Standard for use in

flight

IEC 60601-1 classification Class II (double insulation), Type BF

Available modes Standby, CPAP and CPAP with ramp

Sound pressure level < 26 dBA

Nominal dimensions (L x W x H) 16.46 cm x 8.38 cm x 5.13 cm (6.48” X 3.30” X 2.02”)

Weight  284g (10 oz)

Housing construction Flame retardant engineered thermoplastic

Supplemental oxygen Not for use with oxygen

Standard air filter Polyester

Air outlet The 22 mm air outlet complies with ISO 5356-1

PowerShell Battery Specifications

45 Watt-hours capacity

Lithium Ion Battery Pack

4S1P

Weight approx. 225 g (8 oz.)

Expected Service Life Z1, PowerShell and Power Supply: 5 years Tube Adaptor, USB Cable and End Cap: 2 years, Filter, CPAP Tube: See Care Instructions.

Performance Specifications

Operating pressure range 4 to 20 cm H2O

Maximum single fault steady pressure 30 cm H2O

Deliverable pressure accuracy  ±(0.6 cm H2O + 4% of the measured reading)